Land Clearing in Wesley Chapel, Florida

Forestry mulching, underbrushing and lot clearing across Wesley Chapel and Pasco County. One machine cuts, grinds and spreads in a single pass, so nothing is piled, burned or hauled off your place.

  • Priced from photographs, usually same day
  • Seven finished jobs across Pasco County
  • From $3,000 a machine day
$3,000Minimum, per machine day
1Finished job in Wesley Chapel
7Jobs across Pasco County
8County machine days on the ground

What we clear in Wesley Chapel

Eight things we are actually asked for on Pasco County ground. If your job is not on this list, say so and we will tell you straight whether it is ours.

Forestry mulching

One machine cuts standing growth and grinds it back into the ground as chip in the same pass. No pile, no burn, no trucks.

Lot and parcel clearing

Anything from a lot inside an existing street to a few acres out east, back to ground you can walk and drive.

Palmetto and brush removal

Saw palmetto and wax myrtle taken off flatwoods ground in a single pass, which is the standard job here.

Home site preparation

Building envelope, drive and pad taken down to workable ground before your builder arrives.

Excavator clearing and grubbing

Where the roots have to come out rather than the top growth being ground off. Our 30 inch excavator mulcher.

Selective clearing

You mark the live oaks and pines that stay and we cut round them.

Trail and access cutting

A drive line in from the road, or a ride cut through a block on ground with no track on it yet.

Fence and boundary lines

A line you can run wire along or walk, cut without disturbing what is either side of it.

Who calls us in Pasco County

People about to build

This county is building fast and most of what we are asked for here is an envelope, a drive and a pad taken down before the builder mobilises.

Owners of a held lot

Parcels bought ahead of a plan that have grown in while the plan went through. One machine day is often the whole job.

Owners of flatwoods acreage

A few acres of palmetto and wax myrtle out east that stopped being usable years ago.

Owners with a code letter

An overgrown lot generates letters. A machine day is usually the whole answer.

Owners of heavier ground

Not everything here is palmetto. Some of this county has needed the biggest machines we run, and that is a photographs question rather than a postcode one.

Sellers and agents

A parcel nobody can walk is a parcel nobody buys. A day with a mulcher changes what a buyer is looking at.

How the work runs

Four steps, and the first two happen before anything leaves our yard.

Send photographs

Pictures with something in frame for scale, the lot size, and a note on what you want left standing. Palmetto height is worth one shot on its own.

We give you a real number

Usually the same day. It is a day count against a published rate, and it names the machine, because in this county the machine has varied more than anywhere else.

One machine, one pass

The mulching head cuts, grinds and spreads as it goes. No separate clear, pile and haul stage, which is where most of the cost and all of the mess normally sits.

You get a mulch layer

Not bare sand and not a field of cut stems. On a new build site that chip layer keeps the surface stable and the dust down.

What it costs

We sell machine days, not acres, and we publish the rates. Pasco is the one county where all three of our machines have been to work, and that is the clearest sign that the machine is chosen from the job rather than from the map.

Skid steer mulcherFrom $3,000

Stems to 8 inches. Transport included. The machine recorded on our Wesley Chapel acre

Excavator mulcherFrom $3,500

Stems to 30 inches, and grubbing. Plus transport

Dedicated mulcherFrom $4,000

Stems to 24 inches. Plus transport. The dearest machine we run

What moves the day count

Palmetto height and densityStem size in the heaviest partTrees you want keptBuild timelineAccess and turning roomNeighbouring lots in one visit

The rate follows the machine rather than the size of the stem, which catches people out: the dedicated mulcher costs more than the excavator even though the excavator takes bigger timber and pulls roots. Transport is the cost of getting the bigger two machines to you and is separate from hauling material away, which is quoted per job.

What we have actually done in Wesley Chapel

One finished job, an acre, a single machine day, Apr 2024. One job is one job and we would rather show it than pad it.

Apr 2024One acre, 1 machine day, with the skid steer mulcher
Elsewhere in the countySix more jobs, 7 machine days, from a quarter acre up to three and a half
The county spreadSkid steer, excavator and dedicated mulcher have all worked in Pasco

One acre on the smallest machine in a single day, which is what a straightforward lot here looks like. The county record behind it is the useful part: three and a half acres has taken a day on one machine and a day on another, a quarter acre has taken a day, and every machine we own has been out here. If a contractor quotes your Pasco lot without asking what is standing on it, they are guessing.

The ground on a Pasco County parcel

What grows hereSlash pine flatwoods with saw palmetto and wax myrtle underneath, live oak and cabbage palm on the higher sand, and cypress in the low heads and along the creeks
What that means for a machinePalmetto is standard work and goes quickly. Heavier stems in the oak hammocks and cypress in the low ground are what push a parcel onto a bigger machine, and this county has plenty of both
WaterFlat and low lying with a made drainage system through the developed parts and natural low heads further east. A wet week shows up in the day count out east and barely at all in town
AccessNew subdivision streets in the west and graded tracks in the east. On an infill lot the question is where the machine gets in and where the low loader sits
3 of 3

Machines have worked in this county, which is true nowhere else on our books. The machine is picked from what is standing on your parcel, not from where it is.

What customers say

★★★★★

FloridaLandClearing.com was beyond helpful in getting our property cleared. They were spot on with their quote, their crews arrived on time, and the machines they used were impressive to watch.

Jenny Anderson
★★★★★

We had a difficult project a few other companies attempted and left. Florida Land Clearing was able to get the job done and a day earlier than quoted.

Joseph Kelly
★★★★★

These guys are pros. Watching these machines just devour acres of underbrush in a day was one of the coolest things I have seen. I cannot believe how this transformed my property.

Adam Wilson

Before you book: trees on a Pasco County parcel

Pasco County rules apply in the unincorporated county, which is where Wesley Chapel sits, and land being developed is treated differently from an established homesite.

What is protected depends on the species and the size of the trunk, and whether the parcel is a single family homesite or land being developed. In a county growing this quickly the development questions come up far more often than the tree by tree ones do.

Tell us what you want gone and what you want kept when you send photographs. If you are clearing ahead of a build, say so, because the questions worth asking are different and the timing usually matters to you.

We are a clearing contractor, not the permit office, and we do not file applications. Confirm your own parcel and your own trees with Pasco County before you commit.

Wesley Chapel questions

How much does it cost to clear a lot in Wesley Chapel?

From $3,000 a machine day. Our job here was an acre and a single day on the skid steer. Send photographs and we will confirm a day count and name the machine.

Which machine will you send?

Whichever the job needs, and in this county that has genuinely varied. All three of our machines have worked in Pasco. It is decided from photographs of what is standing, not from the size of the parcel.

Can you clear before my builder starts?

Yes, and it is most of what we are asked for here. Envelope, drive and pad taken down to workable ground so the site is ready rather than a delay. Tell us the build timeline when you send photographs.

How long does it take?

A day for an acre of ordinary flatwoods here. Heavier stems or wet low ground are what push it further and both show up clearly in photographs.

What happens to everything you cut?

It stays on the ground as mulch, spread as the machine goes. Nothing piled, nothing burned. On a new build site that chip layer keeps the surface workable.

Do I need a permit?

It depends on the species and size of what is standing and whether the parcel counts as land being developed. Wesley Chapel sits in the unincorporated county, so the county is who to ask. Confirm with them rather than taking a contractor word for it, ours included.

Are you licensed and insured?

Insured, and we send the certificate before the machine moves. Florida does not issue a contractor licence for forestry mulching, so nobody holds one. Insurance is the document worth asking every contractor to produce.

Get a price on your Wesley Chapel lot

Send a few photographs, the lot size and a note on what you want left standing. Get the heaviest part in shot, because in this county the machine has varied more than anywhere and the machine is most of the price.

Call or text 813-733-6607