Land Clearing in Ocala, Florida
Forestry mulching, underbrushing and lot clearing across Ocala and Marion County. One machine cuts, grinds and spreads in a single pass, so nothing is piled, burned or hauled off your place.
- Priced from photographs, usually same day
- Both Ocala jobs were an acre and a machine day
- From $3,000 a machine day
What we clear in Ocala
Eight things we are actually asked for on Marion County ground. If your job is not on this list, say so and we will tell you straight whether it is ours.
One machine cuts standing growth and grinds it back into the ground as chip in the same pass. No pile, no burn, no trucks.
Clean lines cut for board or wire. On the farm ground round this town it is the job we are asked for most.
Yaupon, briar and cedar taken out from under the live oaks and hickory you are keeping.
A lot in town that has closed in, or grazing ground that has gone back to cedar and scrub.
Where the roots have to come out rather than the top growth being ground off. Our 30 inch excavator mulcher.
Building envelope, drive and pad taken down to workable ground before your builder arrives.
You mark the oaks that stay and we cut round them. Round here the old trees are usually why the place is worth what it is.
A drive line in from the road, or a ride cut so you can ride or drive the back of the place.
Who calls us in Marion County
Fence lines, paddock edges and cedar creeping back into grazing. The standing job in this county.
Lots inside the city that have grown in. One machine day is normally the whole answer.
Clearing the envelope, the drive and the pad before the builder mobilises, so the site is ready rather than a delay.
An overgrown vacant lot inside city limits generates letters. A machine day usually settles it.
A cut line through a block tells you what you own and where the low ground is before you plan anything round it.
A parcel nobody can walk is a parcel nobody buys. A day with a mulcher changes what a buyer is looking at.
How the work runs
Four steps, and the first two happen before anything leaves our yard.
Pictures with something in frame for scale, the lot size, and a note on what you want left standing. Stem size in the heaviest part is what we look at first.
Usually the same day. It is a day count against a published rate, not a guess dressed up as a quote, and it names the machine.
The mulching head cuts, grinds and spreads as it goes. No separate clear, pile and haul stage, which is where most of the cost and all of the mess normally sits.
Not bare sand and not a field of cut stems. Along a paddock line that layer keeps the edge tidy for a good while longer.
Photographs from our jobs
Photographs from jobs we have run. Nothing here is stock photography and nothing here is generated.




What it costs
We sell machine days, not acres, and we publish the rates. This county holds one of the clearest examples we have of the machine mattering more than the size: a quarter acre elsewhere in Marion needed our dearest machine while a full acre in town ran on the cheapest.
Stems to 8 inches. Transport included. The machine recorded on both of our Ocala jobs
Stems to 30 inches, and grubbing. Plus transport
Stems to 24 inches. Plus transport. The dearest machine we run
What moves the day count
The rate follows the machine rather than the size of the stem, which catches people out: the dedicated mulcher costs more than the excavator even though the excavator takes bigger timber and pulls roots. Transport is the cost of getting the bigger two machines to you and is separate from hauling material away, which is quoted per job.
What we have actually done in Ocala
Two finished jobs in the same month, an acre each, a machine day each, Mar 2024, both on the skid steer mulcher.
| Mar 2024 | One acre, 1 machine day, with the skid steer mulcher |
| Mar 2024 | One acre, 1 machine day, with the skid steer mulcher |
| Elsewhere in the county | A quarter acre on the dedicated mulcher, and three acres in 2 machine days |
The quarter acre job in that third row is the one worth reading twice. It needed the dedicated mulcher, the dearest machine we run, while both of these Ocala acres ran on the skid steer with transport included. Four times the ground, a cheaper machine. What is standing decides the machine and the machine decides the rate. Across Marion County we have finished four jobs in five machine days.
The ground on a Marion County place
| What grows here | Live oak and hickory on the hammocks, longleaf and turkey oak on the sand ridges, and southern red cedar, yaupon and briar taking open ground back wherever grazing has stopped |
| What that means for a machine | Cedar and old field scrub are quick work. Old hammock that has closed in under a canopy you are keeping is much slower, and the two often sit on the same farm |
| Water | Sandy and free draining across most of the county, with limestone underneath and the odd depression in an otherwise flat field. Standing water is rarely the constraint here |
| Access | City streets on one side and farm gates on the other. Gate width is the usual limit rather than the approach, and it is worth a photograph |
Needed our dearest machine elsewhere in this county, while a full acre in Ocala ran on the cheapest. Four times the ground for a lower rate. Size is not the thing that sets the price.
What customers say
FloridaLandClearing.com was beyond helpful in getting our property cleared. They were spot on with their quote, their crews arrived on time, and the machines they used were impressive to watch.
Jenny AndersonWe had a difficult project a few other companies attempted and left. Florida Land Clearing was able to get the job done and a day earlier than quoted.
Joseph KellyThese guys are pros. Watching these machines just devour acres of underbrush in a day was one of the coolest things I have seen. I cannot believe how this transformed my property.
Adam WilsonBefore you book: trees on a Marion County parcel
Marion County and the City of Ocala each have a say depending on where your parcel sits, and land in genuine agricultural use is treated differently from a homesite.
What is protected depends on the species and the size of the trunk, and whether the parcel is a single family homesite, farm ground or land being developed. Mature live oaks attract more attention than understory growth, and inside the city the rules are more detailed than in the county.
Tell us what you want gone and what you want kept when you send photographs. If the parcel is in agricultural use, say so early, because that changes which office you should be asking.
We are a clearing contractor, not the permit office, and we do not file applications. Confirm your own parcel and your own trees with Marion County or the City of Ocala before you commit.
Ocala questions
How much does it cost to clear a lot in Ocala?
From $3,000 a machine day. Both of our jobs here were an acre and a single day on the skid steer. Send photographs and we will confirm a day count and name the machine.
Why would a smaller parcel cost more?
Because of the machine it needs. A quarter acre elsewhere in this county needed the dedicated mulcher at the top of our rate card while a full acre here ran on the skid steer with transport included. Heavy standing timber, not acreage, moves you up the list.
Can you cut paddock and fence lines?
Yes, and round this town it is the most common ask we get. A clean line for board or wire, cut without disturbing the timber either side of it.
How long does it take?
A day for an acre, on the evidence of both our jobs here. Heavier stems or a canopy you want kept are what push it further, and both show up clearly in photographs.
What happens to everything you cut?
It stays on the ground as mulch, spread as the machine goes. Nothing piled, nothing burned. Along a paddock edge that layer keeps things tidy for longer.
Do I need a permit?
It depends on the species and size of what is standing, whether you are inside the City of Ocala, and whether the land counts as agricultural. Confirm with the right office rather than taking a contractor word for it, ours included.
Are you licensed and insured?
Insured, and we send the certificate before the machine moves. Florida does not issue a contractor licence for forestry mulching, so nobody holds one. Insurance is the document worth asking every contractor to produce.
Get a price on your Ocala lot
Send a few photographs, the lot size and a note on what you want left standing. Get the heaviest stems in shot, because that is what decides which machine comes and the machine is most of the price.
Call or text 813-733-6607