Land Clearing in Tallahassee, Florida

Forestry mulching, underbrushing and selective clearing across Tallahassee and Leon County. One machine cuts, grinds and spreads in a single pass, so nothing is piled, burned or hauled off your place.

  • Priced from photographs, usually same day
  • Three acres here went in a single machine day
  • From $3,000 a machine day
$3,000Minimum, per machine day
1Finished job in Tallahassee
3Acres cleared, in one machine day
3Machines, at 8, 24 and 30 inches

What we clear in Tallahassee

Eight things we are actually asked for on Leon County ground. If your job is not on this list, say so and we will tell you straight whether it is ours.

Forestry mulching

One machine cuts standing growth and grinds it back into the ground as chip in the same pass. No pile, no burn, no trucks.

Selective clearing under a canopy

You mark the live oaks and hickory that stay and we cut round them. On this ground the canopy is protected and it is also the point of the place.

Underbrush removal

Privet, briar, wisteria and sweetgum cleared out from under hardwood you are keeping.

Homesite and parcel clearing

Ground that has closed in on the edges of town, back to a surface you can walk and build on.

Excavator clearing and grubbing

Where the roots have to come out rather than the top growth being ground off. Our 30 inch excavator mulcher.

Home site preparation

Building envelope, drive and pad taken down to workable ground before your builder arrives.

Lane and access cutting

A drive line in from the road, or a cut line through a block on a parcel with no track on it yet.

Fence and boundary lines

A line you can run wire along or walk, cut without disturbing what is either side of it.

Who calls us in Leon County

Owners of hardwood ground

Old live oak and hickory with an understory that has closed in completely. The most common shape of job on this ground.

People about to build

Clearing the envelope, the drive and the pad before the builder mobilises, on ground where the tree rules are usually the binding constraint.

Owners fighting privet and wisteria

Both take a shaded understory fast and both come back from what is left. How much has to come out changes which machine we send.

Owners of a few acres on the edge of town

Parcels big enough that a mulcher makes obvious sense and small enough that nobody has ever put a machine on them.

Owners with a code letter

An overgrown parcel inside city limits generates letters. A machine day usually settles it.

Sellers and agents

A parcel nobody can walk is a parcel nobody buys. A day with a mulcher changes what a buyer is looking at.

How the work runs

Four steps, and the first two happen before anything leaves our yard.

Send photographs

Pictures with something in frame for scale, the acreage, and a clear note on which trees stay. On this ground that note matters more than usual.

We give you a real number

Usually the same day. It is a day count against a published rate, and it names the machine, because the machine is most of the difference.

One machine, one pass

The mulching head cuts, grinds and spreads as it goes. No separate clear, pile and haul stage, which is where most of the cost and all of the mess normally sits.

You get a mulch layer

Not bare clay and not a field of cut stems. On rolling ground that layer is what stops the surface moving in the wet months.

What it costs

We sell machine days, not acres, and we publish the rates. We have finished one job in this county and we are not going to dress it up as a pattern. What it does show is that three acres of this ground went in a day, on the biggest machine we run.

Skid steer mulcherFrom $3,000

Stems to 8 inches. Transport included. The machine for a lot or a small parcel

Excavator mulcherFrom $3,500

Stems to 30 inches, and grubbing. Plus transport

Dedicated mulcherFrom $4,000

Stems to 24 inches. Plus transport. The dearest machine we run

What moves the day count

Which trees stayStem size in the heaviest partPrivet and wisteria densityWet ground in the hollowsAccess and overhead clearanceCity limits or county

The rate follows the machine rather than the size of the stem, which catches people out: the dedicated mulcher costs more than the excavator even though the excavator takes bigger timber and pulls roots. Transport is the cost of getting the bigger two machines to you and is separate from hauling material away, which is quoted per job.

What we have actually done in Tallahassee

One finished job, three acres, a single machine day, Jul 2024. That is the whole record here and we would rather show it than pad it.

Jul 2024Three acres, 1 machine day, with the dedicated mulcher
The county totalOne job, 1 machine day. This is the only Leon County job on our books
What that tells youThree acres in a day is good going, and it took our biggest machine to do it

One job is one job. We are not going to build an average out of it or tell you what your parcel will take on the strength of it. What is worth knowing is that this ground carried three acres in a single day, and that it needed the dedicated mulcher at $4,000 plus transport rather than the skid steer to do it. Fewer days on a bigger machine is not automatically a smaller bill, which is why we quote the machine and the day count together.

The ground on a Leon County parcel

What grows hereLive oak, hickory, magnolia and beech on the rolling red clay hills, longleaf and shortleaf pine on the sandier ground, and privet, wisteria and sweetgum filling everything underneath
What that means for a machineHeavier standing hardwood than most of the state, which is what pushes a parcel here onto a bigger machine. Rolling clay carries a machine well when it is dry and much less well when it is not
WaterHollows and creek bottoms between the hills hold water and stay soft after rain. They are usually a small share of a parcel and a large share of the day count
AccessCity streets on one side and clay roads on the other, with mature canopy over a lot of both. Overhead clearance on the way in is worth a photograph here
3 acres

In a single machine day on this ground, with the dedicated mulcher. Fewer days on a bigger machine is not automatically a smaller bill, so we quote the machine and the day count together.

What customers say

★★★★★

FloridaLandClearing.com was beyond helpful in getting our property cleared. They were spot on with their quote, their crews arrived on time, and the machines they used were impressive to watch.

Jenny Anderson
★★★★★

We had a difficult project a few other companies attempted and left. Florida Land Clearing was able to get the job done and a day earlier than quoted.

Joseph Kelly
★★★★★

These guys are pros. Watching these machines just devour acres of underbrush in a day was one of the coolest things I have seen. I cannot believe how this transformed my property.

Adam Wilson

Before you book: trees on a Leon County parcel

The City of Tallahassee and Leon County each have their own rules and both are more protective than most of Florida. Assume they apply and check rather than the other way round.

What is protected depends on the species and the size of the trunk, and whether the parcel is a single family homesite or land being developed. Mature canopy trees are the point of the local codes here and are treated very differently from understory growth. Whether you are inside the city limits or in the county changes which rules apply and they are not the same.

Tell us what you want gone and what you want kept when you send photographs. If anything you want removed has a trunk worth measuring, settle its status with the right office before anyone books a machine rather than after.

We are a clearing contractor, not the permit office, and we do not file applications. Confirm your own parcel and your own trees with the City of Tallahassee or Leon County before you commit.

Tallahassee questions

How much does it cost to clear land in Tallahassee?

From $3,000 a machine day on the skid steer with transport included. Our one job here ran on the dedicated mulcher, which starts at $4,000 plus transport, because of what was standing. Send photographs and we will name the machine as well as the day count.

You have only done one job here. Why should I use you?

Fair question, and we would rather say so than pretend otherwise. One job in this county, three acres, one day. What we can show you is the whole record across the state and the fact that we quote from photographs rather than guessing. Judge us on that.

Why did it need the biggest machine?

Because of what was standing. Hardwood here runs heavier than most of Florida and the dedicated mulcher gets through stems that would take the skid steer far longer. It is the dearest machine we run and we only send it when it is the right one.

Can you clear under the oaks without damaging them?

Yes, and it is the shape of most work on this ground. You mark what stays, the machine works round it, and the canopy is untouched. Be clear in the photographs about which trees you mean.

What happens to everything you cut?

It stays on the ground as mulch, spread as the machine goes. Nothing piled, nothing burned. On rolling clay that layer holds the surface through the wet months.

Do I need a permit?

Assume yes and check. Both the city and the county here are more protective than most of the state, and which one applies depends on whether you are inside the city limits. Confirm with them rather than taking a contractor word for it, ours included.

Are you licensed and insured?

Insured, and we send the certificate before the machine moves. Florida does not issue a contractor licence for forestry mulching, so nobody holds one. Insurance is the document worth asking every contractor to produce.

Get a price on your Tallahassee lot

Send a few photographs, the acreage and a clear note on which trees stay. Tell us whether the parcel is inside the city limits, because that changes whose rules apply before anything else does.

Call or text 813-733-6607