Land Clearing in Zolfo Springs, Florida

Forestry mulching, underbrushing and acreage clearing around Zolfo Springs and the Peace River ground in Hardee County. One machine cuts, grinds and spreads in a single pass, so nothing is piled, burned or trucked off your ground.

  • Priced from photographs, usually same day
  • Five acres in three days on our smallest machine
  • From $3,000 a machine day
$3,000Minimum, per machine day
5Acres cleared in Zolfo Springs
3Machine days on that job
1Job across Hardee County, and this is it

What we clear in Zolfo Springs

Eight things we are actually asked for on this ground. If your job is not on this list, say so and we will tell you straight whether it is ours.

Forestry mulching

One machine cuts standing growth and grinds it back into the ground as chip in the same pass. No pile, no burn, no trucks.

Acreage clearing

Multi day work on parcels measured in acres rather than lots, priced as a day count and quoted before the machine moves.

Brush and regrowth removal

Regrowth on ground that has been out of use for a few seasons, taken off in a single pass rather than cut and stacked.

Selective clearing

You mark the live oaks and the cabbage palms that stay and we cut round them.

Fence and boundary lines

A line you can run wire along or walk, cut without disturbing what is either side of it.

Excavator clearing and grubbing

Where the roots have to come out rather than the top growth being ground off. Our 30 inch excavator mulcher.

Grove and pasture ground

Old grove rows and pasture going back to scrub, opened up so you can see the ground again.

Access and trail cutting

A drive line or a run through a big parcel, cut to a width you give us.

Who calls us in the Peace River ground

Owners of working acreage

Cattle ground and old grove is what this county is made of. Most of what we are asked for out here is opening ground back up rather than clearing it for the first time.

Owners of ground gone back to scrub

Pasture that has been out of use for a few seasons closes fast. A machine takes it back in days, not weeks.

People about to build in the country

Envelope, drive and pad on a parcel where the house will sit well back from the road.

Owners with a river or creek boundary

The Peace and its creeks cut through a lot of this ground and the low edges are soft. Tell us where yours runs before we plan the passes.

Owners who want the oaks kept

Live oak is the thing worth keeping on cattle ground and it is usually the thing people ask us to work around. Say so first and we will.

Sellers and agents

Nobody buys acreage they cannot walk. Opening it up changes what a buyer is looking at and what they will pay for it.

How the work runs

Four steps, and on a parcel this size the first two matter more than usual.

Send photographs

On acreage we want several: one from the road, one from the middle if you can get there, and the parcel boundary if you have it. Say where the low ground and the creek edges are.

We give you a real number

Usually the same day. It is a day count against a published rate, and on a multi day job we will tell you the count before anything moves, not after.

One machine, one pass

The mulching head cuts, grinds and spreads as it goes. Across five acres that is the difference between a clearing job and a haulage bill.

You get a mulch layer

Not bare ground and not a field of cut stems. On pasture going back into use that layer breaks down into the surface rather than sitting on it.

What it costs

We sell machine days, not acres, and we publish the rates. The job we did here is worth reading before you assume a big parcel needs a big machine, because it did not.

Skid steer mulcherFrom $3,000

Stems to 8 inches. Transport included. The machine recorded on five acres here in three days

Excavator mulcherFrom $3,500

Stems to 30 inches, and grubbing. Plus transport

Dedicated mulcherFrom $4,000

Stems to 24 inches. Plus transport. The dearest machine we run

What moves the day count

AcreageHow thick the regrowth isWhere the machine gets inTrees you want keptCreek and low groundHow long the ground has stood

The rate follows the machine rather than the size of the stem, which catches people out: the dedicated mulcher costs more than the excavator even though the excavator takes bigger timber and pulls roots. Transport is the cost of getting the bigger two machines to you and is separate from hauling material away, which is quoted per job.

What we have actually done in Zolfo Springs

One finished job, five acres, three machine days, Apr 2026, and it went with the skid steer mulcher.

Apr 2026Five acres, 3 machine days, with the skid steer mulcher
Elsewhere in the countyNothing. This is the only job we have finished in Hardee County
What it works out atA little under two acres a day on the smallest machine we own

One job is the whole Hardee County record and we would rather say so than pad it. What makes this one worth reading is the machine. Five acres went on the skid steer mulcher, which is the smallest and cheapest machine we run, in three days. Parcel size and machine size are separate questions and people conflate them constantly. What decides the machine is the size of the stems and whether the roots have to come out, not how many acres there are.

The ground on a Hardee County parcel

What grows hereCabbage palm and live oak on the flatwoods, old grove rows on the higher sand, and dense regrowth of brush and briar on anything that has been out of use for a few seasons
What that means for a machineRegrowth and palmetto go quickly, which is why five acres moved as fast as it did. Old grove rows are quick too. Mature oak and heavy creek edge growth are the slow parts
WaterFlat ground either side of the Peace River, with creeks and sloughs running into it and low pasture that holds water after rain. The wet edges are what plan the passes
AccessCounty roads and ranch tracks, with gates rather than made drives on most parcels. Gate width is a more common constraint here than road access
5 acres

In three machine days on the smallest machine we own. A big parcel does not automatically need a big machine, and this job is the reason we say so.

What customers say

★★★★★

FloridaLandClearing.com was beyond helpful in getting our property cleared. They were spot on with their quote, their crews arrived on time, and the machines they used were impressive to watch.

Jenny Anderson
★★★★★

We had a difficult project a few other companies attempted and left. Florida Land Clearing was able to get the job done and a day earlier than quoted.

Joseph Kelly
★★★★★

These guys are pros. Watching these machines just devour acres of underbrush in a day was one of the coolest things I have seen. I cannot believe how this transformed my property.

Adam Wilson

Before you book: trees on a Hardee County parcel

Zolfo Springs is a small incorporated town, so ground inside the town limits answers to the town and the surrounding acreage answers to Hardee County. On working land it is usually the county.

What is protected depends on the species and the size of the trunk, and on how the parcel is classified. On land in genuine agricultural use the rules that apply are often not the residential tree rules at all, which is why the classification is the first thing to establish.

Tell us what you want gone and what you want kept when you send photographs. If the parcel is in an agricultural classification, or any part of it runs down to the river, say so early, because that changes which office you should be asking.

We are a clearing contractor, not the permit office, and we do not file applications. Confirm your own parcel and your own trees with the Town of Zolfo Springs or Hardee County before you commit.

Zolfo Springs questions

How much does it cost to clear land in Zolfo Springs?

From $3,000 a machine day. Our job here was five acres and three days. Send photographs and the acreage and we will give you a day count rather than a range.

Five acres in three days. Is that typical?

It is what this parcel took, on regrowth and palmetto that a machine moves through quickly. Five acres of mature oak would be a different number and we would tell you that from the photographs rather than on day four.

Do I need a bigger machine for a bigger parcel?

No, and this job is the reason we labour the point. Five acres went on our smallest machine. What decides the machine is the size of the stems and whether the roots have to come out, not the acreage.

Can you open up old grove rows?

Yes, and it is quick work. The rows are already spaced for a machine, so what is usually left is the regrowth between and under them.

What happens to everything you cut?

It stays on the ground as mulch, spread as the machine goes. Nothing piled, nothing burned. On pasture going back into use that layer breaks down into the surface.

Do I need a permit?

It depends on the species and size of what is standing and on how your land is classified. Confirm it with the town or the county, whichever your parcel sits in, rather than taking a contractor word for it, ours included.

Are you licensed and insured?

Insured, and we send the certificate before the machine moves. Florida does not issue a contractor licence for forestry mulching, so nobody holds one. Insurance is the document worth asking every contractor to produce.

Get a price on your Zolfo Springs lot

Send several photographs, the acreage and a note on what you want left standing. Mark the creek edges and the low pasture, because that is what we plan the passes around.

Call or text 813-733-6607