Land Clearing in Crestview, Florida
Forestry mulching, underbrushing and land clearing across Crestview and Okaloosa County. One machine cuts, grinds and spreads in a single pass, so nothing is piled, burned or hauled off your place.
- Priced from photographs, usually same day
- Three county jobs, three towns, three single days
- From $3,000 a machine day
What we clear in Crestview
Eight things we are actually asked for on the private ground in this county. If your job is not on this list, say so and we will tell you straight whether it is ours.
One machine cuts standing growth and grinds it back into the ground as chip in the same pass. No pile, no burn, no trucks.
A lot or a small parcel back to ground you can walk and build on, which is most of what we are asked for here.
What comes up on a lot along this corridor once it has sat a few seasons waiting on a plan.
You mark what stays and we cut round it. Buyers here are usually keeping the pines and clearing everything below them.
Where the roots have to come out rather than the top growth being ground off. Our 30 inch excavator mulcher.
Building envelope, drive and pad taken down to workable ground before your builder arrives.
A lane in from the road on a parcel that has never had a drive on it, which is common on the ground north of the interstate.
A line you can run wire along or walk, cut without disturbing the timber either side of it.
Who calls us in Okaloosa County
This corridor is building steadily as people move inland from the coast, and an envelope, a drive and a pad taken down before the builder mobilises is the standing job.
Ground bought ahead of a plan and grown in while the plan went through. All three of our county jobs have been about that size.
Parcels with road frontage and no way onto them. A cut line in is often the first thing anyone does with the ground.
Private ground in this county sits in a narrow band, so parcels tend to be small, close together and worth doing on the same trip.
An overgrown lot inside city limits generates letters. A machine day usually settles it.
A parcel nobody can walk is a parcel nobody buys. A day with a mulcher changes what a buyer is looking at.
How the work runs
Four steps, and the first two happen before anything leaves our yard.
Pictures with something in frame for scale, the acreage, and a note on what you want left standing. One shot of the frontage matters if there is no drive in yet.
Usually the same day. It is a day count against a published rate, not a guess dressed up as a quote.
The mulching head cuts, grinds and spreads as it goes. No separate clear, pile and haul stage, which is where most of the cost and all of the mess normally sits.
Not bare ground and not a field of cut stems. On a parcel waiting on a build that layer keeps the surface stable and the dust down.
Photographs from our jobs
Photographs from jobs we have run. Nothing here is stock photography and nothing here is generated.
What it costs
We sell machine days, not acres, and we publish the rates. Three jobs here in three different towns, each a single machine day, on parcels from just over half an acre to a full acre. A small record and a consistent one.
Stems to 8 inches. Transport included. The machine for a lot or a small parcel
Stems to 30 inches, and grubbing. Plus transport
Stems to 24 inches. Plus transport. The dearest machine we run
What moves the day count
The rate follows the machine rather than the size of the stem, which catches people out: the dedicated mulcher costs more than the excavator even though the excavator takes bigger timber and pulls roots. Transport is the cost of getting the bigger two machines to you and is separate from hauling material away, which is quoted per job.
What we have actually done in Crestview
One finished job, just over half an acre, a single machine day, Mar 2025. All three Okaloosa jobs came inside four months of each other.
| Mar 2025 | Six tenths of an acre, 1 machine day, machine not recorded on the scope |
| Apr and Jun 2025 | Two more county jobs, an acre each, a machine day each |
| The county total | Three jobs, three towns, 3 machine days |
Three jobs in three different towns across a county that runs from the beach to the state line, and all three came out at a single machine day. The parcels were all around an acre, so that consistency is about size as much as ground. Two of the three scopes do not record the machine, so we are not going to tell you which went on those.
The ground on an Okaloosa County parcel
| What grows here | Pine over most of the private ground, scrub oak and briar filling in underneath on anything that has sat a while, and hardwood along the creek bottoms |
| What that means for a machine | A parcel that has only been empty a few seasons is quick work. One that has been held for twenty years is a different job at the same acreage, and that is what the photographs tell us |
| Water | Sand drains fast across most of this ground. The creek bottoms stay soft after rain and are usually a small share of a parcel and a large share of the day count |
| Shape of the county | A great deal of Okaloosa is a military reservation, so private ground sits in a narrow band running north from the coast. Parcels are close together, which makes doing two on one trip unusually easy here |
Three jobs, three single machine days, spread along the narrow band of private ground that runs from the coast up to the state line. All of them around an acre.
What customers say
FloridaLandClearing.com was beyond helpful in getting our property cleared. They were spot on with their quote, their crews arrived on time, and the machines they used were impressive to watch.
Jenny AndersonWe had a difficult project a few other companies attempted and left. Florida Land Clearing was able to get the job done and a day earlier than quoted.
Joseph KellyThese guys are pros. Watching these machines just devour acres of underbrush in a day was one of the coolest things I have seen. I cannot believe how this transformed my property.
Adam WilsonBefore you book: trees on an Okaloosa County parcel
Okaloosa County and the City of Crestview each have a say depending on where your parcel sits, and whether you are inside city limits changes the answer more here than the county line does.
What is protected depends on the species and the size of the trunk, and whether the parcel is a single family homesite or land being developed. The city rules along this corridor are more detailed than the county ones, and with so much of the county in federal hands it is worth being certain which authority your parcel actually falls under.
Tell us what you want gone and what you want kept when you send photographs. If the parcel adjoins the reservation boundary, say so, because that is worth confirming before anyone books a machine.
We are a clearing contractor, not the permit office, and we do not file applications. Confirm your own parcel and your own trees with Okaloosa County or the City of Crestview before you commit.
Crestview questions
How much does it cost to clear land in Crestview?
From $3,000 a machine day. Our job here was six tenths of an acre and a single day. Send photographs and the acreage and we will give you a day count rather than a range.
How long does it take?
One day, on all three of our Okaloosa jobs. Every one was around an acre, so a larger parcel will be different and we will say so before you book.
Can you do my parcel and my neighbour's on one trip?
Yes, and private ground here sits close together, so it is easier to arrange in this county than in most. The machine is already on site and the transport is already paid.
Which machine did you use here?
We are not going to guess. The scope on our Crestview job does not record it. The acreage and the day count are above and they are what we can show you.
What happens to everything you cut?
It stays on the ground as mulch, spread as the machine goes. Nothing piled, nothing burned. On a parcel waiting on a build that layer keeps the surface stable.
Do I need a permit?
It depends on the species and size of what is standing and whether you are inside the City of Crestview, which matters here more than most places. Confirm with the right office rather than taking a contractor word for it, ours included.
Are you licensed and insured?
Insured, and we send the certificate before the machine moves. Florida does not issue a contractor licence for forestry mulching, so nobody holds one. Insurance is the document worth asking every contractor to produce.
Get a price on your Crestview lot
Send a few photographs, the acreage and a note on what you want left standing. Tell us how long the parcel has stood empty, because on this ground that predicts the day count better than the acreage does.
Call or text 813-733-6607